Quick Project Search


| Back |

Department of Chemical Engineering | Final Year Research Project Topics | Download Free Projects

  • 76. THE RATE OF BLEACHING OF PALM OIL WHITE COAL

    »   ABSTRACT This project was carried using activated local form local corporation Enugu, and the rate of bleaching of palm oil using spectrophotometer by measuring the absorbance. It was also performed to check the suitability of local as a bleaching agent for palm oil. The local from local corporation Enugu was collected and activated with acid (H2S04) before being used for the bleaching process....Continue Reading »

    Item Type: Project Material |  65 pages |  429 engagements | 

  • 77. PRODUCTION OF PLANT MIRROR USING LOCAL RAW MATERIAL

    »   ABSTRACT This project “production of plane mirror using local raw material” is meant to study the possibility of producing plane mirror using sand rich in silica as its major local raw material. Plane mirror is produced by casting one side of a sheet glass.  Presently in Nigeria, sheet glass is not used easily produce and as such, the local raw material used in the in the production of pla...Continue Reading »

    Item Type: Project Material |  65 pages |  461 engagements | 

  • 78. FABRICATION OF CANDLE MOULD WITH TWENTY FOUR (24) HOLES

    »   ABSTRACT The candle mould has twenty four (24) holes which could produce twenty four (24) quality candle sticks Aluminum, a non ferrous metal was used as the construction material for the mould the type of casting technique used was green sand mould method. In the process of moulding the pattern was placed in the flask which contained the green sand.  The flask was turned upside down and the r...Continue Reading »

    Item Type: Project Material |  65 pages |  432 engagements | 

  • 79. CONSTRUCTION OF A SIMPLE SIZE REDUCTION MACHINE

    »   ABSTRACT This project (Construction Of A Simple Size Reduction Machine) It was constructed locally with the use of local materials and tools in I.M.T mechanical Engineering workshop.  The various parts of the equipment were constructed separately using mild steel before finally coupled. During the construction, the conveyors and it’s housing were first constructed.  It consists of a shaft w...Continue Reading »

    Item Type: Project Material |  65 pages |  405 engagements | 

  • 80. FORMULATION AND PRODUCTION OF LEVERA SOAP

    »   ABSTRACT The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion. In the production, palm kernel oil (P.K.O) was used instead of tallow or grease.  This was because soap produced from grease or tallow tends to dissolve slowly at room temperature,...Continue Reading »

    Item Type: Project Material |  65 pages |  549 engagements | 

  • 81. THE EFFECT OF LIQUID FLOERATE AND GAS FLOWRATE ON A PACKED ABSORPTION TOWER AND ...

    »   ABSTRACT The purpose of the project is to study the effect of liquid flow rate and gas flow rate on the pressure drop in a packed absorption tower and also to repair and restore the packed absorption tower to good working condition. Trouble shooting revealed that the exit drain value was broken due to carelessness on the part of former user of the equipment.  We had to carry out glassblowing o...Continue Reading »

    Item Type: Project Material |  65 pages |  407 engagements | 

  • 82. COMPARATIVE ANALYSIS OF COAL AND COCONUT ACTIVATED CARBON

    »   ABSTRCT The experiment was carried out to analyze comparatively coal and coconut activated carbon.  The coal sample used in bituminous and with density of 1300kg 1m3 tile coconut shell was used. The coal and coconut shell was first activated using phosphoric acid.  The activated coal and coconut carbons mere then used to bleach palm oil after preliminary treatment of the palm oil. The 10 di...Continue Reading »

    Item Type: Project Material |  65 pages |  433 engagements | 

  • 83. THE USE OF LOCAL PIGMENTS AND EXTENDERS FOR FORMULATION AND PRODUCTION OF EMULSI...

    »   ABSTRACT The major aim of this project research work is to produce emulsion paint from locally sourced pigment & extenders. The materials used for the production was of local source. The major raw materials used for the production of the emulsion paint: water, titanium iv oxide, calcium carbonate, kaoline, calgon, natrosol, biocide P.V.A, ammonia, deformer (Ginap) kerosene, yellow iron oxide an...Continue Reading »

    Item Type: Project Material |  65 pages |  598 engagements | 

  • 84. DESIGN AND OPERATION OF A SHELL AND TUBE HEAT EXCHANGER

    »   TABLE OF CONTENT CHAPTER ONE Introduction CHAPTER TWO 2.0              Literature Review 2.0.1        Classification of heat Exchanger  2.0.2        Categories of heat exchangers 2.0.3        Types of heat exchangers 2.0.4        Material for constructions 2.0.5        Tube shape and position 2.0.6        Firing 2.0.7        Heat so...Continue Reading »

    Item Type: Project Material |  65 pages |  435 engagements | 

  • 85. CONSTRUCTION OF A PILOT MOTORISED MIXER

    »   ABSTRACT A motorized mixer of 200 liters capacity was constructed to have the capability of mixing 200 liters of fluid during operation. The construction of the mixer involves the preliminary measures and calculations on the surface area of the metal sheet.  Some basic workshop practices was carried out during the construction such as the marking out of the metal sheet, cutting of different si...Continue Reading »

    Item Type: Project Material |  65 pages |  393 engagements | 

  • 86. CONSTRUCTION OF A BLENDER

    »   ABSTRACT Blender is an electric machine for size reducing soft food or liquid mixture.  Blender is some time called liquidizer consists of a glass jar or jug containing a steel blade assembly at the base driven by a small electric motor. Construction of blender was done based on the principle of size of reduction using electric motor as the major driver force.  During the construction of blen...Continue Reading »

    Item Type: Project Material |  65 pages |  535 engagements | 

  • 87. CONSTRUCTION OF INDUSTRIAL SIEVE COMPARTMENT

    »   ABSTRACT         The construction of Sieve Industrial Sieve Compartment was carried out in the Engineering Workshop, Institute of Management and Technology, Enugu.         The aim of this project is to fabricate an industrial sieve compartment which is capable of separating solid particles of various sizes.         The construction was carried out in order to analyze the si...Continue Reading »

    Item Type: Project Material |  65 pages |  397 engagements | 

  • 88. THE BLEACHING OF PALM OIL USING ACTIVATED CHARCOAL

    »   ABSTRACT This project work is on the bleaching of palm oil using activated charcoal. The charcoal used for this work was made from pieces of animal bone by carbonization method.  It was then activated into two different samples.  Firstly, the basic sample was activated using anaphoric acid (H2 s04) while the other was activated by just heating as a control for the experiment; both at a const...Continue Reading »

    Item Type: Project Material |  65 pages |  774 engagements | 

  • 89. CONSTRUCTION OF INDUSTRIAL WHEEL BARROW

    »   ABSTRACT           Wheel barrow can be defined as a simple machine used in transferring heavy loads materials from one place to another by pushing. It can be used or serve as farm equipment, industrial equipment and for other purpose.           How ever, mateials used for the cnstruction of wheelbarrow are bought in standard sizes either in long bare eg for the handle or in st...Continue Reading »

    Item Type: Project Material |  65 pages |  397 engagements | 

  • 90. A PROJECT REPORT ON CONSTRUCTION OF INDUSTRIAL SIEVE COMPARTMENT

    »   ABSTRACT         The construction of Sieve Industrial Sieve Compartment was carried out in the Engineering Workshop, Institute of Management and Technology, Enugu.         The aim of this project is to fabricate an industrial sieve compartment which is capable of separating solid particles of various sizes.         The construction was carried out in order to analyze the si...Continue Reading »

    Item Type: Project Material |  65 pages |  481 engagements | 

  • 91. PRODUCTION OF DOMESTIC POWDER

    »   ABSTRACT This research project is aimed at producing domestic powder and consequently, three different types of powder were produced, namely, simple face powder (pan cake), medicated/Antiseptic powder (dristing   powder).   During the various production Talcum, Zinc oxide, Perfume, Menthol, Tragasan 300 DP (Triclosan), Mineral oil and colour (brown) were the materials used in the production ...Continue Reading »

    Item Type: Project Material |  65 pages |  432 engagements | 

  • 92. CONSTRUCTION OF 500 GALION (2250 LITRES) WATER RESERVOIR

    »   ABSTRACT             The construction of the 500 gallous (2,250 litre) of water is a project which has definite mathematical patterns. The choice of a cylindrical pattern of design involved the application of mathematical deductions to analyse the size of materials required.             The introductory and scope of the project emphasized the construction and installation ...Continue Reading »

    Item Type: Project Material |  65 pages |  314 engagements | 

  • 93. CONSTRUCTION OF A "CHEMICAL RACK"

    »   ABSTRACT The project done was a metal chemical rack. The rack was made of steel, which is soft to cutting, blending and several other operations applied to the metal during construction. The main purpose of constructing this metal rack is to be used for storing chemicals in the laboratory for easy accessibility and safe keeping. The to tal cost of the constructional project was estimated at the...Continue Reading »

    Item Type: Project Material |  65 pages |  337 engagements | 

  • 94. CONSTRUCTION OF A METAL RACK

    »   ABSTRACT This project report is on the construction of a metal rack which can be put to use in laboratories, industries, shops, kitchens, and also for displaying various articles.  The construction work was done in a mechanical work shop.   Racks are of various types which concides with the numerous uses to which they are applied.  Some types of racks includes wooden racks and metal. The met...Continue Reading »

    Item Type: Project Material |  65 pages |  363 engagements | 

  • 95. CONSTRUCTION OF A JUICE EXTRACTOR MACHINE

    »   ABSTRACT         A Juice extractor machine is a device that is used to extract liquid (Juice) from fruits and vegetables in a process called juicing. The machine is constructed manually with the use of local materials and tools.  The material used for the construction of the machine is mild steel sheet. During the construction of the machine, the various parts of it were constructed sep...Continue Reading »

    Item Type: Project Material |  65 pages |  555 engagements | 

  • 96. CONSTRUCTION OF KEROSENE COOKING STOVE

    »   ABSTRACT The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties passed by the chosen mild steel are; machinability ,weldability,durability,andformability.me...Continue Reading »

    Item Type: Project Material |  65 pages |  377 engagements | 

  • 97. CONSTRUCTION OF HYDRO CYCLONE

    »   ABSTRACT A cyclone is an equipment or a device used for the separation of dust particles from air, which has no moving component parts. This mechanism can also be defined as a system of winds circulating about a center of relatively low barometric pressure and on the earths surface, blowing inward in spiral form. This project is constructed for the separation of liquid – liquid and solid – ...Continue Reading »

    Item Type: Project Material |  65 pages |  414 engagements | 

  • 98. CONSTRUCTION OF A CHEMICAL RACK, STUDY APPARATUS

    »   ABSTRACT             The construction of the 500 gallous (2,250 litre) of water is a project which has definite mathematical patterns. The choice of a cylindrical pattern of design involved the application of mathematical deductions to analyse the size of materials required. The introductory and scope of the project emphasized the construction and installation of a reservoir for wate...Continue Reading »

    Item Type: Project Material |  65 pages |  338 engagements | 

  • 99. CONSTRUCTION OF AN INDUSTRIAL BARROW

    »   ABSTRACT An Industrial barrow was produced which would aid in conveying heavy materials in the laboratory and industrial set up. It was made from mild steel that was cut to dimension, made into shape and coupled to form the desired outstanding barrow.  Details are shown in chart (fig 1) containing the picture representation. Some of it’s dimensions are; Bucket                 ...Continue Reading »

    Item Type: Project Material |  65 pages |  360 engagements | 

  • 100. CONSTRUCTION OF A MODEL SHELL AND TUBE HEAT EXCHANGER

    »   ABSTRACT         The precise content of this project was to construct a model shell and tube heat  exchanger.         The material for construction of this project (equipment) and their dimensions are as follows: 500mm length of a tube bundle 20mm diameter of the tube bundle 650mm length of the shell 120mm diameter of the shell 70mm length of the inlet and outlet 20.5mm diameter ...Continue Reading »

    Item Type: Project Material |  65 pages |  401 engagements | 


Searching makes things a lot easier.. Search for what you are looking for

Quick Project Search