1. DESIGN AND FABRICATION OF BASIC STATIC AND DYNAMIC BALANCING MACHINE

» ABSTRACT This work is an attempt to evolve a means for statically and dynamical balancing of mechanical components. This will no doubt evolve greater success in ensuring sound fabrication of our local machine and ensuring that life span of such machine is prolonged since vibration will be reduced to the bearest minimum. Every wheel and its shaft have to be in a state of balanced, two mating sha...Continue Reading »

Item Type: Project Material | 65 pages | 6,545 engagements |

2. REPAIR OF DEEP FREEZER

» ABSTRACT This work gives an account of all activities carried out to restore a faulty and abandoned deep freezer to normal functioning. This report therefore contains the different stages embarked in the execution of the project. These include the literature back ground, checking’s conducted, cleaning, repair operations and replacement of some pants. ...Continue Reading »

Item Type: Project Material | 65 pages | 4,993 engagements |

3. CONSTRUCTION OF TWO FACE GAS BURNER

» ABSTRACT This project deals with the construction and fabrication of a two face gas burner. The gas components consists of the following major components; burner, injector opening, mixing tube, burner support, etc. The gas stove was constructed from medium carbon steel material. The choice of the selected material has to do with cost, and local availability. The distance between the cooking pot an...Continue Reading »

Item Type: Project Material | 65 pages | 5,736 engagements |

4. THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE

» ABSTRACT Parameters on which clear prints depends were comprehensively investigated. The study revealed that clear print depends on the impressed pressure, the working temperature and the silver print paper. Also studied were the manners of dependence of these parameters on prints impressed on sheets of varied thickness. The result of this investigations were util...Continue Reading »

Item Type: Project Material | 65 pages | 5,247 engagements |

5. DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE

» ABSTRACT The design and fabrication of a reciprocating nail gasket is a new innovation in technology. The one in existence is manually operated. In which a punch that is adjacent to a die is mounted to the handle which is attached to the shaft. A helical spring that is incorporated to the shaft of the punch, helps the handle return to its initial position, which makes the machines tedious a...Continue Reading »

Item Type: Project Material | 65 pages | 5,423 engagements |

6. CONSTRUCTION OF A STANDARD BANKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (ELE...

» ABSTRACT This project is designed to make the students utilize as many theoretical and practical concept as have been instructed in alstron to mechanical engineering workshop technology. Students are expected to learn and apply concepts, principles about energy specially the conversions of electrical energy to thermal energy, conduction and conventional...Continue Reading »

Item Type: Project Material | 65 pages | 6,318 engagements |

7. DESIGN AND FABRICATION OF MODERN LOCKABLE BOOKSHELF

» PRAFACE Based the fact, for humans quest to belted and secure things he uses and have them arranged in place without being transfer, like the files tea books, important to man for future wage and academic excel. To this end, in which this written articles need to be presented, we embarked on the consultation and research to being out a fornicated type of modern lockable bookshelf with which doc...Continue Reading »

Item Type: Project Material | 65 pages | 5,826 engagements |

8. REFURBISHING OF MECHANICAL ENGINEERING DRAWING STUDIO

» ABSTRACT This project is concerned write the identification of those defects that are found in most of the drawing tables in the Mechanical Engineering drawing studio. The report investigates the possible ways through which the mentioned above can be brought back to normal standard for usage ins the department. Defects comes up due to inability to renovate and also inability of proper usage. There...Continue Reading »

Item Type: Project Material | 34 pages | 5,353 engagements |

9. FABRICATION OF A FOLDABLE CAMP BED

» ABSTRACT In this project, three alternative design solutions were considered for the foldable cam – bed. The authors utilize the local materials (with cost consideration) for the components. The merits and demerits of each of the alternative with respect to the considered group were also discusses and the solutions of the alternatives that best satisfied the limitations were selected for pr...Continue Reading »

Item Type: Project Material | 65 pages | 6,906 engagements |

10. DESIGN AND FABRICATION A CORN SHELLING MACHINE

» CHAPTER ONE INTRODUCTION The project is a pre requisite for the award of Higher National Diploma (HND) in Mechanical Engineering. The project “Design and fabrication a corn shelling machine” is indeed an essential one in a time like this when almost al human endeavour is embracing technology for efficiency and realiability. First a corn shelling exercise is a function which could either be ...Continue Reading »

Item Type: Project Material | 65 pages | 7,448 engagements |

11. DESIGN AND FABRICATION OF A PRINTING /BLOCK MACHINE

» ABSTRACT Parameters on which clear prints depends were comprehensively investigated. The study revealed that clear print depends on the impressed pressure the working temperature and the gold foil print paper life expectancy. Also studies were he manner of dependence of these parameters on prints impressed on sheets of varied thickness. The results of these investigation were utizlied i...Continue Reading »

Item Type: Project Material | 65 pages | 6,041 engagements |

12. DESIGN AND FABRICATION OF MOBILE DEEP FREEZER

» ABSTRACT This wrote up is a detail of the processes for the physical realization of the design and construction of mobile deep freezer. It is divided into chapters which discussed expensively the practical refrigeration cycle with rull attention given to design factors working principals and choice of material. Also considered were fabrication assembly and safely requirement C...Continue Reading »

Item Type: Project Material | 65 pages | 5,263 engagements |

13. DESIGN AND FABRICATION OF CHILDREN SWING

» ABSTRACT Children swing plays a unique role in the live and upbringing of a child. It makes children to avoid dangerous games thereby providing them on opportunity for proper relaxation. The children swing consists of a cost iron metal that is welded with a chain and set that makes children move to and fro in an oscillatory movement, thereby crat...Continue Reading »

Item Type: Project Material | 65 pages | 5,416 engagements |

14. CONSTRUCTION OF A SCREW CONVEYOR WITH A SINGLE PHASE ELECTRIC MOTOR

» TABLE OF CONTENT CHAPTER ONE 1.1 Introductions 1.2 Description of the screw conveyor CHAPTER TWO 2.1 Mode of operation 2.2 Material selections CHAPTER THREE 3.1 design 3.2 design analysis 3.3 principle of operation 3.4 capacity of the screw conveyor 3.5 sequence of operation/ construction CHAPTER FOUR 4.1 assembling of the conveyor 4.2 cost analysis CHAPTER FIVE 5.1 conclusions 5.2 recommendations...Continue Reading »

Item Type: Project Material | 65 pages | 6,887 engagements |

15. THE FABRICATION OF A PRESSURIZED KEROSENE OVEN

» ABSTRACT This project has been fabricated with special economical needs for the small scale baking industries, wholesalers and distributors who import this type of baking oven from outside the country to supply the customers. Who wish to use it or those that cannot after gas oven can be used in baking any type of available within the tropics. It I am also be used in are where there are no sourc...Continue Reading »

Item Type: Project Material | 65 pages | 5,393 engagements |

16. CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL (WIRELESS REMOTE)...

» ABSTRACT Construction of a potable electric operated motor vehicle for long Volvo Bus. In this project involves the knowledge of mechanical engineering workshop technology and engineering material science and strength. This was exactly what we were taught. We contracted the electric car with the actual dimension of long Volvo bus(Ml ) got from the catalogue and we enlarged the scale by 1: 8mm. ...Continue Reading »

Item Type: Project Material | 65 pages | 4,582 engagements |

17. DESIGN AND CONSTRUCTION OF A METALLIC BOOK SHELF

» ABSTRACT This project aims at designing and constructing a book metallic shelf hose capability will be to contain different standard sizes of books at minimum paces. What is taken into consideration in this project are the cost of its production, processes, and maintenance. Other considerable factors are the functional aspect of the plant/equipment and its durability as well as the reliability....Continue Reading »

Item Type: Project Material | 65 pages | 7,550 engagements |

18. AN ELECTRIC POP-CORN MACHINE

» ABSTRACT An electric popcorn machine is machine that is used to popcorn for human consumption. It uses electricity as it sources of energy, transfer it energy, that is used to pop the Corn. Also it has a stirrer, which rotate due to the convection of electrical energy from the source to mechanical energy in the motor, the stirrer tons the corn so that it will not burns. This project went as far as...Continue Reading »

Item Type: Project Material | 24 pages | 7,206 engagements |

19. CONSTRUCTION OF GRAIN GRINDING MACHINE

» CHAPTER ONE INTRODUCTION 1.1 Background of the Study The grinding of grain occurs by the application of mechanical forces that alter the structure of the grain by overcoming the interior binding forces, after which the state of the solid is changed to flour. Grain produce on the farm is processed in some form before it is actually consumed. One of the important processes involving a non chemical c...Continue Reading »

Item Type: Project Material | 65 pages | 9,450 engagements |

20. THE DESIGN AND FABRICATION OF A IRON SHELLING MACHINE

» ABSTRACT. A machine for corn Sheller is highly and greatly need for consistence of usage of corn in local and international levels. With regards to this indispensable need, a corn shelling machine is designed which operates to remove the corn grains and leaving the cobs intact. In attainment to this design objective and aims, a proper considerations was given to the machinability factor which i...Continue Reading »

Item Type: Project Material | 65 pages | 5,833 engagements |

21. THE EFFECTS OF DIFFERENT PROCESSIGN TECHNIQUIES ON THE ORGANOLEPTIC QUALITY OF S...

» ABSTRACT Soymilk was processed from soymilk (Glycine Max) seed using that different processing techniques: A Hot extraction method B. Cold extraction method C. Soaking before hot extraction method. The soymilk samples were subjected to sensory evaluation using 9 point hedonic scale and proximate analysis. R...Continue Reading »

Item Type: Project Material | 65 pages | 4,968 engagements |

22. EFFECTS OF SOME SALTS (Nacl and Na2 SO4) ON FUNCTIONAL PROPERTIES OF PUMPKIN SE...

» ABSTRACT A study was carried out on the physico – chemical properties of fluted pumpkin seeds (Telferia occidentalis) flours. The 1st two flour samples were obtained by boiling for 1 hr in 0.5% solution for Nacl, and .5% solution of Na2 S04 respectively. The 2nd two samples were obtained by soaking for 12 hrs in 0.5% soln of Nacl, and 0.5% soln of Na2 So4resp...Continue Reading »

Item Type: Project Material | 65 pages | 7,660 engagements |

23. THE EFFECT OF DIFFERENT PROCESSIGN TECHNIQUIES ON THE ORGANOLEPTIC QUALITY OF SO...

» ABSTRACT Soymilk was processed from soymilk (Glycine Max) seed using that different processing techniques: A Hot extraction method B. Cold extraction method C. Soaking before hot extraction method. The soymilk samples were subjected to sensory evaluation using 9 point hedonic scale and proximate analysis. ...Continue Reading »

Item Type: Project Material | 65 pages | 4,746 engagements |

24. PRODUCTION OF MIXED FRUIT USING FUSE LOCALLY SOURED CITRUS FRUITS ORANGE (CITRU...

» ABSTRACT Fix locally sourced citrus fruit (orange citrus sinners) tangerine (citrus reticulate) lemon citrus lemoni) (Lime (citrus aurantifolis) and Grape (citrus paradist) were mixed together to produce mixed fruit drink. Different ratios of orange, tangerine lemon, lime and Grape fruit juice in this order were blended together, sample A 9:5:1:1:1, B5:2:1:1:1: C 4:3:2:2:2: D6:...Continue Reading »

Item Type: Project Material | 65 pages | 0 engagements |

25. "MARGARINE” PRODUCTION USING OIL BLENDS FROM PALM KERNEL, COCONUT AND MELON

» ABSTRACT Palm kernel, coconut and melon oils were extracted and refined. Their physical and chemical characteristics were examined. The refined oils were blended to produce three samples of margarine: palm kernel oil margarine (PKO), palm kernel and coconut oils margarine were tested for free fatty acid and Iodine value with the following results 0.27,0.84, 1.68 Free Fatty Acid, 17.77, 20.3...Continue Reading »