Quick Project Search


| Back |

Mechanical Engineering Project Topics & Research Materials | Final Year Research Project Topics With Free Chapter One

  • 151. THE CONSTRUCTION AND FABRICATION OF A METAL BOOKSHELF

    »   ABSTRACT In our society today reading and writing has taken its roll as a way of measuring human knowledge.  Knowledge could only be obtain successively by the use of books for research but unfortunately because of hard time, books have because very expensive. This has called for preservation of books already purchased, whether in the public library school or in the house hold so that it can u...Continue Reading »

    Item Type: Project Material |  65 pages |  1,025 engagements | 

  • 152. CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT

    »   ABSTRACT            This project is concern about the construction of an electrical stove with three oven apartment is described in his project.  It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternat6ive means to replace the use of  kerosine and gas for cooking and drying which are often not available due to s...Continue Reading »

    Item Type: Project Material |  65 pages |  1,196 engagements | 

  • 153. DESIGN A ND FABRICATION OF A DUST EXTRACTOR

    »   ABSTRACT Man’s imp act on global environment system especially in the area of dust extraction is now at a scale where it is disrupting.  These dust extractors varies in major ways. The environmental degration is, in turn contributing to health threat in this part of the globe.  Unfortunately most factories, workshops which suppose to posses these machines for dust extractions a re not havin...Continue Reading »

    Item Type: Project Material |  65 pages |  914 engagements | 

  • 154. DESIGN OF MELON DE-HUSKING AND SEPARATION MACHINE

    »   TABLES OF CONTENT CHAPTER ONE 1.1              Introduction                                        1.2              Description of the Design Melon                    1.3              Principles of Operation                       1.4              Advantages     ...Continue Reading »

    Item Type: Project Material |  65 pages |  1,412 engagements | 

  • 155. DESIGN AND CONSTRUCTION OF A SPIN DRYER

    »   ABSTRACT This work is aimed at designing and fabricating a spin dryer which can be used in drying spent grains after brewing. This will no doubt save considerable human labours and time wastage involved in conventional method of drying the spent grains by spreading on the ground. It also saves as a means of employments for our teaming population. This machine was designed after due consideratio...Continue Reading »

    Item Type: Project Material |  65 pages |  2,194 engagements | 

  • 156. DESIGN AND FABRICATION OF BASIC STATIC AND DYNAMIC BALANCING MACHINE

    »   ABSTRACT This work is an attempt to evolve a means for statically and dynamical balancing of mechanical components. This will no doubt evolve greater success in ensuring sound fabrication of our local machine and ensuring that life span of such machine is prolonged since vibration will be reduced to the bearest minimum. Every wheel and its shaft have to be in a state of balanced, two mating sha...Continue Reading »

    Item Type: Project Material |  65 pages |  1,571 engagements | 

  • 157. REPAIR OF DEEP FREEZER

    »   ABSTRACT             This work gives an account of all activities carried out to restore a faulty and abandoned deep freezer to normal functioning.  This report therefore contains the different stages embarked in the execution of the project.  These include the literature back ground, checking’s conducted, cleaning, repair operations and replacement of some pants.        ...Continue Reading »

    Item Type: Project Material |  65 pages |  795 engagements | 

  • 158. CONSTRUCTION OF TWO FACE GAS BURNER

    »   ABSTRACT             This project which is on the design and fabrication of a two face gas burner is a brief exploration on the various ways and means of designing, construction, operating the two face gas burner, putting cost into consideration for economic advantage.  Herein are brief information and literature on gas burner.  The properties of the constructional feature and the...Continue Reading »

    Item Type: Project Material |  65 pages |  1,189 engagements | 

  • 159. THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE

    »   ABSTRACT             Parameters on which clear prints depends were comprehensively investigated.  The study revealed that clear print depends on the impressed pressure, the working temperature and the silver print paper.   Also studied were the manners of dependence of these parameters on prints impressed on sheets of varied thickness.  The result of this investigations were util...Continue Reading »

    Item Type: Project Material |  65 pages |  926 engagements | 

  • 160. DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE

    »   ABSTRACT The design and fabrication of a reciprocating nail gasket is a new innovation in technology. The one in existence is manually operated. In which a punch that is adjacent to a die is mounted to the handle  which  is attached to the shaft. A helical spring that is incorporated to the shaft of the punch, helps the handle return to its initial position, which makes the machines tedious a...Continue Reading »

    Item Type: Project Material |  65 pages |  1,083 engagements | 

  • 161. CONSTRUCTION OF A STANDARD BANKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (ELE...

    »   ABSTRACT             This project is designed to make the students utilize as many theoretical and practical concept as have been instructed in alstron to mechanical engineering workshop technology.         Students are expected to learn and apply concepts, principles about energy specially the conversions of  electrical energy to thermal energy, conduction and conventional...Continue Reading »

    Item Type: Project Material |  65 pages |  1,906 engagements | 

  • 162. DESIGN AND FABRICATION OF MODERN LOCKABLE BOOKSHELF

    »   PRAFACE Based the fact, for humans quest to belted and secure things he uses and have them arranged in place without being transfer, like the files tea books, important to man for future wage and academic excel. To this end, in which this written articles need to be presented, we embarked on the consultation and research to being out a fornicated type of modern lockable bookshelf with which doc...Continue Reading »

    Item Type: Project Material |  65 pages |  1,379 engagements | 

  • 163. REFURBISHING OF MECHANICAL ENGINEERING DRAWING STUDIO

    »   ABSTRACT             This project is concerned write the identification of those defects that are found in most of the drawing tables in the Mechanical Engineering drawing studio.             The report investigates the possible ways through which the mentioned above can be brought back to normal standard for usage ins the department.             Defects comes u...Continue Reading »

    Item Type: Project Material |  65 pages |  961 engagements | 

  • 164. FABRICATION OF A FOLDABLE CAMP BED

    »    ABSTRACT In this project, three alternative design solutions were considered for the foldable cam – bed. The authors utilize the local materials (with cost consideration) for the components. The merits and demerits of each of the alternative with respect to the considered group were also discusses and the solutions of the alternatives that best satisfied the limitations were selected for pr...Continue Reading »

    Item Type: Project Material |  65 pages |  1,624 engagements | 

  • 165. DESIGN AND FABRICATION A CORN SHELLING MACHINE

    »   CHAPTER ONE INTRODUCTION The project is a pre requisite for the award of Higher National Diploma (HND) in Mechanical Engineering. The project “Design and fabrication a corn shelling machine” is indeed an essential one in a time like this when almost al human endeavour is embracing technology for efficiency and realiability. First a corn shelling exercise is a function which could either be ...Continue Reading »

    Item Type: Project Material |  65 pages |  2,398 engagements | 

  • 166. DESIGN AND FABRICATION OF A PRINTING /BLOCK MACHINE

    »   ABSTRACT Parameters on which clear prints depends were comprehensively investigated.  The study revealed that clear print depends on the impressed pressure the working temperature and the gold foil print paper life expectancy. Also studies were he manner of dependence of these parameters on prints impressed  on sheets of varied thickness.  The results of these investigation were  utizlied i...Continue Reading »

    Item Type: Project Material |  65 pages |  1,034 engagements | 

  • 167.  DESIGN AND FABRICATION OF MOBILE DEEP FREEZER

    »   ABSTRACT This  wrote  up is a detail of the processes for the physical realization of the  design and construction  of mobile deep freezer. It is divided into chapters which discussed expensively the practical  refrigeration cycle  with  rull attention  given to design factors working principals and choice of material. Also considered  were fabrication assembly and safely requirement C...Continue Reading »

    Item Type: Project Material |  65 pages |  961 engagements | 

  • 168. DESIGN AND FABRICATION OF CHILDREN SWING

    »   ABSTRACT             Children swing plays a unique role in the live and upbringing of a child.  It makes children to avoid dangerous games thereby providing them on opportunity for proper relaxation.             The children swing consists of a cost iron metal that is welded with a chain and set that makes children move to and fro in an oscillatory movement, thereby crat...Continue Reading »

    Item Type: Project Material |  65 pages |  929 engagements | 

  • 169. CONSTRUCTION OF A SCREW CONVEYOR WITH A SINGLE PHASE ELECTRIC MOTOR

    » TABLE OF CONTENT CHAPTER ONE 1.1 Introductions 1.2 Description of the screw conveyor CHAPTER TWO 2.1 Mode of operation 2.2 Material selections CHAPTER THREE 3.1 design 3.2 design analysis 3.3 principle of operation 3.4 capacity of the screw conveyor 3.5 sequence of operation/ construction CHAPTER FOUR 4.1 assembling of the conveyor 4.2 cost analysis CHAPTER FIVE 5.1 conclusions 5.2 recommendations...Continue Reading »

    Item Type: Project Material |  65 pages |  1,458 engagements | 

  • 170. THE FABRICATION OF A PRESSURIZED KEROSENE OVEN

    »   ABSTRACT This project has been fabricated with special economical needs for the small scale baking industries, wholesalers and distributors who import this type of baking oven from outside the country to supply the customers. Who wish to use it or those that cannot after gas oven can be used in baking any type of available within the tropics. It I am also be used in are where there are no sourc...Continue Reading »

    Item Type: Project Material |  65 pages |  1,257 engagements | 

  • 171. CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL (WIRELESS REMOTE)...

    »   ABSTRACT Construction of a potable electric operated motor vehicle for long Volvo Bus. In this project involves the knowledge of mechanical engineering workshop technology and engineering material science and strength. This was exactly what we were taught. We contracted the electric car with the actual dimension of long Volvo bus(Ml ) got from the catalogue and we enlarged the scale by 1: 8mm. ...Continue Reading »

    Item Type: Project Material |  65 pages |  792 engagements | 

  • 172. DESIGN AND CONSTRUCTION OF A METALLIC  BOOK SHELF

    »   ABSTRACT This project aims at designing and constructing a book metallic shelf hose capability will be to contain different standard sizes of books at minimum paces. What is taken into consideration in this project are the cost of its production, processes, and maintenance. Other considerable factors are the functional aspect of the plant/equipment and its durability as well as the reliability....Continue Reading »

    Item Type: Project Material |  65 pages |  1,402 engagements | 

  • 173. AN ELECTRIC POP-CORN MACHINE

    »   ABSTRACT An electric popcorn machine is machine that is used to popcorn for human consumption. It uses electricity as it sources of energy, transfer it energy, that is used to pop the Corn. Also it has a stirrer, which rotate due to the convection of electrical energy from the source to mechanical energy in the motor, the stirrer tons the corn so that it will not burns. This project went as far...Continue Reading »

    Item Type: Project Material |  65 pages |  1,697 engagements | 

  • 174. CONSTRUCTION OF GRAIN GRINDING MACHINE

    »   ABSTRACT             The aim of the project is to construct a domestic grain grinding machine to be powered by electric motor through pulley and belt transmission.             The project is to perform mostly blending and grinding on grains e.g beans, maize, melon, millet and such other food crops.             In construction of the project, there are various fa...Continue Reading »

    Item Type: Project Material |  65 pages |  2,448 engagements | 

  • 175. THE DESIGN AND FABRICATION OF A IRON SHELLING MACHINE

    »   ABSTRACT. A machine for corn Sheller is highly and greatly need for consistence of usage of corn in local and international levels. With regards to this indispensable need, a corn shelling machine is designed which operates to remove the corn grains and leaving the cobs intact. In attainment to this design objective and aims, a proper considerations was given to the machinability factor which i...Continue Reading »

    Item Type: Project Material |  65 pages |  929 engagements | 


Can't find what you are looking for? Hire An IPROJECT Writer To Work On Your Topic.

Go to Hire A Writer Page

Searching makes things a lot easier.. Search for what you are looking for

Quick Project Search