DESIGN AND CONSTRUCTION OF 1000VA AUTOMATIC VOLTAGE REGULATION
Sold By: Joe Project Store | Item Type: Project Material | Report this? | Attributes: 65 pages | 1-5 chapters | Amount: ₦5,000 | Marked useful: 5,487 times
Delivery: Within 24 hoursABSTRACT
The design and construction of 1000VA Automatic Voltage Regulator is made to power our Electrical and Electronic devices, supplying them with the normal output voltage which ranges from 100V- 240v irrespective of the constant voltage and current fluctuation, failure and instability.
This project helps the society in many ways which include the stepping up and down of voltage in order to avoid destruction and at is used to vary the amount of power supply. It is a protection device.
TABLE OF CONTENTS CHAPTER ONE1.1 Background of Study
1.2 Statement of Problem
1.3 Objectives of study
1.4 Significance of Study
1.5 Scope and Limitation of Study
1.6 Definition of Term
CHAPTER TWO2.1 Literature Review
2.2 The Impact of the Prepaid Meter on Revenue
2.3 Solutions to Electricity Problems In Nigeria
References
CHAPTER THREE3.0 Concept
3.1 Specification
3.2 Block Diagram
3.3 Circuit Design
CHAPTER FOUR
4.0 The Materials and the Method of Construction
4.1 The Functions of the Above Materials
4.2 Testing Instrument, Equipment and the Techniques
4.3 Testing Techniques
4.4 Assembly and Packaging (Prototype)
CHAPTER FIVE
Bill of Engineering Measurement and Evaluation
CHAPTER SIX
Summary, Conclusion and Recommendations
CHAPTER ONE
1.0 INTRODUCTION
The design and construction of 1000VA automatic voltage regulation is made to solve the problems of fluctuation of current and voltage supplied in the various facilities in our environment. In rent years, the destruction in our electrical and electronic equipment caused due to the and unsteady current has lead many home or family homeless and also an expense.
The introduction of an automatic voltage regulation act as an answer prayer for the protection of our equipment since it comes into existence. This device is made to vary the amount of current supplied through the supplier. It also helps to smoothing the voltage to be used in our electrical and electronic devices.
The automatic voltage regulator is a protective device that brings out a steady current which varies between 100V-240V. This device is very good and active in terms of protecting our devices.
1.1 OBJECTIVE / AIM OF STUDY
The Automatic Voltage Regulator (1000VA) is made to produce a stable and steady current. The device is produced or designed to perform the following functions which includes.
This device is used to step up and step down the voltage when the supply is faulty. It is an appliance that helps to prevent the life span of electronic any electrical and electric devices that makes the use of it.
It also brings out a filtered current which bring smothering the components that can make use of it. This system can be called an automatic machine because it perform the functions of automatic system in which by changing from one stage to another in order to feet the valuable current and voltage to the supplied by the components to makes use of it.
The damages received by the society which ignored the use of automatic voltage regulator is so complicated that it cannot be mentioned in this project. But my advice to the society is to try as much as possible to make the use of automatic voltage regulation in their electrical and electronic components because it is a protective device.
1.3 THE SCOPE OF THE STUDY
The design and construction of IkVA Automatic Voltage Regulator is the project we are construction. We are working on this machine because we have some idea on how this machine can be constructed and also on how it works. We are also doing this because we want to learn more abut it.
As we have mentioned earlier, this device is a protective device that protects our electrical and electronic appliances out of current and voltage fluctuation. This is how it works. When this system is plugged into the sucket or supply, it will receive a minimum voltage of 100v and filter the current and voltage thereby brings out suitable voltage output to be used by the devices in it.
So, we are building or constructing this device to reduce risk and damages the fluctuation of current / voltage caused by power fluctuations.
1.4 DEFINITION OF IMPORTANT TERMS
Fluctuation: The change of voltage from normal to low or
High.
Deep: Process of voltage and current to extent a long way down from its normal supply.
Unstable: Not normal.
This material content is developed to serve as a GUIDE for students to conduct academic research
Delivery: Within 24 hours
Advertise Here
Not what you were looking for? Perform a search
What's your project topic?
Comment on Facebook:
Related Project Materials
- 1.
AN INVESTIGATION INTO THE CONSEQUENCES OF OVER LOADING A TRANSFORMER
AN INVESTIGATION INTO THE CONSEQUENCES OF OVER LOADING A TRANSFORMER CHAPTER ONE INTRODUCTION Background of the study Transformers play a crucial r...More »
Item Type: Project Material | 54 pages | 1,932 engagements |
- 2.
THE ROLE OF ELECTRICITY TARIFF HIKES IN PROMOTING RENEWABLE ENERGY ADOPTION IN NIGERIA
CHAPTER ONE INTRODUCTION Background of the Study Renewable energy is energy derived from natural sources that are replenished at a higher rate than...More »
Item Type: Project Material | 54 pages | 1,450 engagements |
- 3.
AN ASSESMENT OF THE NATIONAL GRID FAILURES AND THE WAY FORWARD
CHAPTER ONE INTRODUCTION 1.1 Background of the study Electricity has become an essential element of contemporary life worldwide, serving various purpo...More »
Item Type: Project Material | 54 pages | 1,577 engagements |
- 4.
IMPACT OF FORMAL EDUCATION ON COMMUNITY DEVELOPMENT IN OREDO LOCAL GOVERNMENT, EDO STATE
ABSTRACT The broad objective of this study is to examine the impact of formal education on community development in Oredo Local Government, Edo State....More »
Item Type: Project Material | 54 pages | 7,106 engagements |
- 5.
CONSTRUCTION OF CRITICAL TEMPERATURE ALARM SYSTEM
ABSTRACT The term “critical point” is sometimes used to denote specifically the vapour liquid critical point of a material. The vapour liquid ...More »
Item Type: Project Material | 46 pages | 13,151 engagements |
- 6.
THE CONSTRUCTION OF LABORATORY EQUIPMENT FOR THE DETERMINATION / INVESTIGATION OF ELECTRICAL INSULAT...
ABSTRACT Insulation deterioration occurs on power system when insulators are subjected to abnormal stresses. Since insulators cannot resist indefinite...More »
Item Type: Project Material | 31 pages | 9,006 engagements |