Home » Mechanical Engineering » CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL (WIRELESS REMOTE)...
CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL (WIRELESS REMOTE) MOTOR VEHICLE FOR LONG VALVE BUS
Sold By: Joe Project Store | Item Type: Project Material | Report this? | Attributes: 65 pages | 1-5 chapters | Amount: ₦5,000 | Marked useful: 4,583 times
Delivery: Within 24 hoursABSTRACT
Construction of a potable electric operated motor vehicle for long Volvo Bus. In this project involves the knowledge of mechanical engineering workshop technology and engineering material science and strength.
This was exactly what we were taught. We contracted the electric car with the actual dimension of long Volvo bus(Ml-) got from the catalogue and we enlarged the scale by 1: 8mm. aluminum cord was used in the construction of the vehicle body because of its light weight and it is paraded with marking sole, which absorbs heat entering from outside into the vehicle due to excess heat or sum on the aluminum. In the construction of electric car, he step are as follows:
1. The fabrication drawing, taking in consideration the various diversion of the component that make up the electric car and the type of materials to be used.
2. The construction of the material was carried out in the workshop with the help of the working tools and finally assembling the components.
TABLE OF CONTENT
CHAPTER ONE
Introduction
CHAPTER TWO
Literature Review
CHAPTER THREE
Material selection
Safety glass
Ignition component
Direction indication
Aluminum sheets
CHAPTER FOUR
Deception of electrical components
The electric motor
The battery
How the battery works
Types of battery
The radio control
CHAPTER FIVE
Types
The function of the type
The wheels
Types of wheels for cars
Centre look wine wheel
The gear box
Maintenance
CHAPTER SIX
Operations
Cost evaluation
CHAPTER SEVEN
Conclusion
Recommendation
Reference
CHAPTER ONE
INTRODUCTION
The purpose of this project is to help the reader to under standard FEW thing about electric car. Those specialist who have slayer long in electric vehicle design recognize this alternative type of transportation as a challenge to commanding importance to contemporary mankind.
The construction of electric car could achiever the speed and acceleration of those of internal combustion engine.
If being build in small qualities. Electric car be constructed of corrosion proof material to provide a far long life.
They do not have the universality of the gasoline powered vehicle. It should be recharged after a shoot period of time or after a trip. It should also have its charging cord connected to the outlet convenient for it and the battery rejuvenated(charged) for the vehicle’s next excursion.
This procedure will minimize the daily effective range, which in a9hour period can now approach 81mites of urban during.
This figure comes into perspective, when it is realized that 50% of the gas line powered car in over sea travel less than 28 miles per day and that 54% of the trips are under 5 miles.
Such usage is already efficiently attained by a good electric car.
In a developing and growing countries here are more effective electric car and fabricating batteries with greater energy storage per unit of weight.
This material content is developed to serve as a GUIDE for students to conduct academic research
Delivery: Within 24 hours
Advertise Here
Not what you were looking for? Perform a search
What's your project topic?
Comment on Facebook:
Related Project Materials
- 1.
INVESTIGATION OF THE EFFECT OF MOULDING SAND (NATURAL & SYNTHETIC) ON CASTING OF FLANGE USING ALUMIN...
ABSTRACT This study tend to investigate the effect of synthetic and natural moulding sand on casting of flange like component. In this study FUTA lo...More »
Item Type: Project Material | 50 pages | 14,088 engagements |
- 2.
DESIGN AND FABRICATION OF AN OFFICE FILE CABINET
ABSTRACT This project covers the design and fabrication of an office file cabinet. The cabinet is to keep and secure files and document for future rec...More »
Item Type: Project Material | 50 pages | 12,823 engagements |
- 3.
DESIGN AND FABRICATION OF MECHANCIAL LAWN MOWER
ABSTRACT Mechanical engineering department of the named institute has many non operational machines sequel to this fact mainten...More »
Item Type: Project Material | 50 pages | 11,151 engagements |
- 4.
THE DESIGN AND CONSTRUCTION OF HOT PRINTING MACHINE
ABSTRACT Parameters on which clear prints depends were comprehensively investigated. The study revealed that clear print dep...More »
Item Type: Project Material | 50 pages | 8,895 engagements |
- 5.
THE CONSTRUCTION AND FABRICATION OF METAL BOOKSHEET
ABSTRACT In our society today reading and writing has taken its roll as a way of measuring human knowledge. Knowledge could only be obtain succe...More »
Item Type: Project Material | 50 pages | 8,618 engagements |
- 6.
REPAIR OF AIR CONDITIONER IN MECHANICAL ENGINEERING DEPARTMENT
CHAPTER ONE 1.1 AIR CONDITIONER Indoor climate, once adjusted to human need only by opening of heating in winter and by open...More »
Item Type: Project Material | 50 pages | 8,745 engagements |