iProject

PREPARATION OF SOAP USING LOCAL RAW MATERIALS

📄 Project Material📋 50 pages📚 Chapters 1–5💾 MS-Word & PDF

Chapters 1–5  |  ₦5,000

Download Complete Project Now
ABSTRACT
 
Preparation of Local Soap involves the se of wood ash from the flowering plant of Daniello, Oliveri (Agba) Isoberllima doka (Achi), Parkia Clappertonwna (Ugba) and Eleasis guineensis (Nkwu) as the source for the caustic alkali were compared for performance.  The woody tissue of the local trees were burnt at the temperature of 250 " 700oc for a period of 3½ - 4 hrs.  But the optimum temperature for maximum extraction of the alkali from the ash is 600oC for a period of 45 " 1hr 30 min.  Caustic alkali free from impurities was obtained by leaching the ash with water in a special fabricated filtrations apparatus.  And this by hot process by which the filtrate was decanted to another container and filtered through a filter paper placed inside the funnel for filtrations and the presence of Alkali was tasted by the action on litmus paper.  Change of damp red litmus paper to blue.
 
Recall that soap is manufactured by the alkaline hydrolysis reaction called saponification, which is the reaction of fats and oils with alkali.
 
C3H5 (COOR)3 + 3kcoH           3kOOCR   +   C3H5(OH)
FatAlkali  Soap   Glycerine 
 
So, according to the results, the filtrate obtained were found to be very daliguisenat.  And the result of the influence of the alogestion on the PH showed that the longer the ash remained in water, the lighter the pH.  So the result of soap produced was found to be free from impurities and has the ability to foam well and the soap produced was found to be market worthy and consumer oriented.
 
 
 
 
 
 
 
TABLE OF CONTENTS
 
Title page
Certification
Dedication
Acknowledgement
Abstract
Table of contents
 
CHAPTER   ONE
1.0 INTRODUCTION
1.1 Background
1.2 Definition
1.3 types of Soap
1.4 Aim and Objectives
1.5 Statements of Problems
1.6 Hypothesis
1.7 Significance
1.8 Limitation of this Study
 
CHAPTER   TWO
2.0 LITERATURE REVIEW
2.1 Sources of Wood Ash for Local Manufactures
2.2 Synthetic Method for Caustic Soda
2.3 The Solvay Process
2.4 Liblance Process
2.5 Chemistry of alkali
2.6 Effect on Soap Manufacture
 
CHAPTER   THREE
3.0 METHODOLOGY
3.1 Sample Collection
3.2 Field Experimentation
3.3 Areas Expected to Cover in Lab
3.4 Fabrication of Equipment for Extraction
3.5 Ignition of "NGU"
3.6 Extraction Procedure
3.7 Crystallization and Re-crystallization Process, Using Distillation Apparatus
3.8 Determination of the PH Sample
3.9 Physical Examination and Tests
3.10 Determination of Caustic Strength of Solution
3.11 Extraction of Caustic Different Digestion Time
 
CHAPTER   FOUR
4.0 PRESENTATION OF RESULTS
4.1 Presentation of Results for Extraction Styles of Caustic From Ash and Preliminary Test on Sample
4.2 Titration Reading for the Determination of Caustic Strength of Sample
4.3 How to Prepare 0.2ml HCL
4.4 Result of Preliminary Test and Titration
4.5 Qualitative Analysis
 
CHAPTER   FIVE
5.0 DISCUSSION OF RESULTS AND CONCLUSION
5.1 Ashing of Wood
5.2 Extraction of Caustic from Ash
5.3 Determination of PH and Caustic Strength of the Caustic Solution
5.4 Qualitative Analysis
5.5 Conclusion
5.6 Recommendations
5.7 Summary
REFERENCE
 

This Project is for You If:

Yes, This Is My Situation — Send Me the Complete Material

Here's everything you get with the complete project package:

✔Chapters 1–5 (Word & PDF)
✔Abstract & Table of Contents
✔References, Citation & Bibliography
✔Fully Editable Microsoft Word Format
✔Original, Plagiarism-Free Content
✔Instant Email Delivery
Complete package —₦10,000₦5,000
Price may return to ₦10,000 at any time.

See Our Conversations With Students on WhatsApp

Students sharing their experience after using our service

Urgent delivery confirmed
Urgent delivery confirmed
Payment received and project delivered
Payment received and project delivered
Quality work and a repeat order
Quality work and a repeat order
Returning customer appreciation
Returning customer appreciation
Customer appreciation
Customer appreciation
I’ve Seen Enough — Get Me This Project Material

What Other Students Are Saying

“The process was actually fine and I got my project quickly. The only thing I didn't really like was that I would have preferred they sent it via WhatsApp instead of email, because email took a bit of checking on my side. But once I got it, everything was already complete and I just edited small parts before submitting.”
Zina
Kenpoly
“My supervisor rejected my Chapter 1 and 2 and I was honestly lost. I got a material here and it already had everything arranged properly. I just adjusted it to my topic and resubmitted. The difference was clear immediately.”
Favour
Nekede
“My supervisor almost finished me 😭 He rejected everything and said I didn't understand basics. I downloaded something here, used it to restructure my work, and resubmitted. That was how I escaped serious stress.”
Nnamdi
Absu

Can't find what you're looking for?

Search thousands of project topics across every department.

Related Project Materials

See More Science Lab Technology Final Year Research Project Topics & Materials »

Frequently Asked Questions

Is this project original and plagiarism-free?
Yes. All project materials on iProject are original, well-researched, and crafted to be plagiarism-free. They are intended as academic guides and reference materials.
What format will I receive the material in?
You will receive the complete project in both Microsoft Word (.docx) and PDF formats, making it easy to edit and submit.
How soon will I get it after payment?
Delivery is instant. Once payment is confirmed, the material is sent directly to your email address. You can also download it immediately from the checkout page.
Can I edit the content to fit my own case study?
Absolutely. The Word format is fully editable, allowing you to modify the content, swap out case studies, and adapt the material to your specific research context.
All My Questions Are Answered — Download the Complete Project
Message us