THE CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER

📄 Item Type: Project Material| 📋 65 pages| 📚 1–5 chapters| Amount: ₦5,000

THE CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER

📄 Project Material 📋 65 pages 📚 Chapters 1–5 💾 MS-Word & PDF

Chapters 1–5  |  ₦5,000

Get Complete Project Material Now
ABSTRACT
This work on the construction and fabrication of a mobile deep freezer revolves around the concept of refrigeration. The concept of refrigeration revolves around the reverse Carnot cycle. This is  a cycle involving isentropic expansion (at the throttling valve), isothermal expansion (at the evaporator), isentropic compression (at the compressor) and isothermal compressor ( at the condenser) Compression raises the temperatures of the refrigerant above that of its natural surrounding so that it can give up its heat in a heat exchanger to a heat sink such as air or water (condenser). Expansion lowers the refrigerant temperature below the temperature that is to be produced inside the cooling compartment.
TABLE OF CONTENT
Title page
Approval page
Dedication 
Acknowledgment
Abstract
Chapter one: Introduction
Chapter Two: Literature Review
Chapter Three: Design Analysis and Calculations
3.1 Determination and choice of condenser and Evaporator temperature.
3.2 Cooling Load Calculation
3.3 Flow Rate
3.3.1 Mass flow rate
3.3.2 Ton of Refrigeration
3.3.3 Volume flow rate
3.4 Determination of Compressor size
3.5 Determination of pipe size and length
3.5.1 Comparing the velocities for different pipe size.
3.5.2 Summary table.
Chapter Four: Construction Details 
4.1 Material Selection
4.2 Sequence of operation
4.3 Assembly
Chapter Five: Cost Analysis
Chapter Six: Recommendation
6.1 Maintenance and use Instructions
6.1.1 Condenser Maintenance
6.1.2 Defrosting
6.1.3 Other Instructions
6.1.4 Common Complaints, Causes and Remedy
Chapter  Seven: Refrigerants
7.1 Requirements for refrigerants
7.2 Identifying Refrigerants by number
7.3 Halide refrigerants
7.4 Grouping and Classification of refrigerants
7.5 Group one Refrigerants
7.6 R-12 Dichlorodi Fluoromethane (ccl2f2)
7.7 R-22 Monochlorodi fluoromethane (CHCLF2)
7.8 R-11 Trichloromono fluoromethane (CCL3F)
7.9 Azeotropic Mixtures
7.10 R-500 Refrigerant
7.11 R-502 Refrigerant (R-22 + R-115) (CHCLF2/CCLF2 CF3)
7.12 R-503 Refrigerant (R-23 +R-13) (CHF3/CCLF3).
7.13 R-504 Refrigerant (R-32 +R115) (CH2F2 (F3 CCLF2)
7.14 Group  two refrigerants
7.15 R- 717 Ammonia (NH3)
7.16 Group three refrigerants
7.17 Expendable Refrigerants
7.18 Water  as a Refrigerants
7.19 Refrigerant Cylinders
7.20 Color code for refrigerants cylinders
Chapter Eight: Conclusion
Reference.

This Project is for You If:

  • You are writing your final year project for the first time and don't want to make costly mistakes
  • This is your exact topic, or very close to what your supervisor gave you
  • Your supervisor has rejected one or more chapters and you don't know what to fix
  • You are stuck on Chapter 3 or data analysis and nothing is making sense
  • Your deadline is close and you are still far behind
  • You can't find enough materials anywhere for your topic
  • My project supervisor is very strict and I don't want to have any problem with my project work — I need a well structured and referenced project
  • I saw my school project requirement and I am confused on where or what to do
  • Everyone in my class has submitted their project and I haven't even started yet
  • My supervisor rejected my research methodology and I don't know what to do
  • I thought my topic was simple and easy but on Chapter 2 I cannot find any material and my work is due for submission
  • I have the content somehow but my references and bibliography are all over the place and I don't know how to arrange them properly
  • I am combining school with work and I genuinely do not have the time to write everything from scratch — I just need something to work with
  • My supervisor changed the topic I wanted and approved another one — I am confused on where to start from
  • I am scared of submitting something that will be flagged for plagiarism — I need something original that I can use as a proper guide
  • I have been browsing the internet for days looking for materials on this topic and I cannot find anything useful anywhere
  • This is not my first time doing this project — I have carried it over before and I cannot afford to do it again
  • I have written some chapters already but I am stuck midway and need to see how others handled the same topic
Yes, This Is My Situation — Send Me the Complete Material

Here's everything you get with the complete project package:

Chapters 1–5 (Word & PDF)
Abstract & Table of Contents
References, Citation & Bibliography
Fully Editable Microsoft Word Format
Original, Plagiarism-Free Content
Delivery Within 24 Hours
Complete package ₦10,000₦5,000
Price may return to ₦10,000 at any time.

See Our Conversations With Students on WhatsApp

Students sharing their experience after using our service

I've Seen Enough — Get Me This Project Material

What Other Students Are Saying

↩ View More Reviews

Can't find what you're looking for?

Search thousands of project topics across every department.

Frequently Asked Questions

Yes. All project materials on iProject are original, well-researched, and crafted to be plagiarism-free. They are intended as academic guides and reference materials.
You will receive the complete project in both Microsoft Word (.docx) and PDF formats, making it easy to edit and submit.
Once payment is confirmed, the material is delivered within 24 hours to the email address supplied at checkout.
Absolutely. The Word format is fully editable, allowing you to modify the content, swap out case studies, and adapt the material to your specific research context.
All My Questions Are Answered — Download the Complete Project