THE DESIGN AND CONSTRUCTION OF 1000 KWA STABILIZER
THE DESIGN AND CONSTRUCTION OF 1000 KWA STABILIZER
Chapters 1–5 | ₦5,000
Get Complete Project Material NowABSTRACT
Despite all attempt of the federal government to have not only an uninterrupted power supply for all cities in Nigeria, but a voltage that is inconformity with the recommended 220/230v for domestic consumption for example. The NEPA Plc is facing some difficulties in generating, transmitting and distributing the required voltage stabilizer, which could be connected, to the main and then the load is in turn connected to it.
This automatic, AC voltage stabilizer has two major sections.
The transformer section, the control circuit unit the third section is the protective unit.
The output of this voltage stabilizer after series of test were performed on it has a voltage 228 + 12 at an overall output power of 1.5 KVA.
TABLE OF CONTENTS
TITLE PAGE
CERTIFICATION
DEDICATION
ACKNOWELDGEMENT
TABLE OF CONTENTS
LIST OF TABLE
ABSTRACT
CHAPTER ONE
1.0 INTRODUCTION
1.1 THE TRANSFORMER UNIT
1.2 THE CONTROL CIRCUITING
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 HISTORY OF THE PROJECT
2.2 THE POWER SUPPLY
2.3 THEORY OF TRANSFORMER
2.4 OPERATION OF THE TRANSFORMER
2.5 VOLTAGE TRANSFORMATION RATION
2.6 TRANSFORMER LOSSES
CHAPTER THREE
3.0 THE CONTROL CIRCUITING
3.1 TRANSISTORS
3.2 RELAY
3.3 THE CONTROL UNIT
3.4 THE POWER SUPPLY UNIT
3.5 VOLTAGE DIVIDER
CHAPTER FOUR
4.0 DESIGN ANALYSIS
4.1 DESIGN FO A TRANSFORMER
4.2 DESIGN OF THE TRANSFORMER PROPER
4.3 CONTROL CIRCUIT DESIGN
4.4 DESIGN CALCULATION
4.5 PRINCIPLE OF OPERATION
CHAPTER FIVE
5.0 CONSTRUCTION AND TESTING OF THE TRANSFORMER
5.1 SHORT CIRCUIT TEST
5.2 TESTING OF THE TRANSFORMER
5.3 OPEN CIRCUIT TEST
5.4 SUMMARY
5.5 CONCLUSION
5.6 RECOMMENDATIONS
5.7 REFERENCES
LIST OF FIGURES
CHAPTER ONE
1.0 Block diagram representation of the voltage stabilizer
CHAPTER TWO
2.0 The Sheel Type Transformer
CHAPTER THREE
3.0 Circuit Diagram of 1.5 KVA Automatic Voltage Stabilizer
3.1 Transistor Diagram
3.2 Relay Diagram
3.3 Block diagram for a typical power supply with corresponding Wve form for each stage
3.4 Exact circuit diagram for the power supply stage have the automatic voltage stabilizer
3.5 Block diagram of voltage divider
CHAPTER FOUR
4.0 Schematic representation of the transformer with different voltage level.
4.1 Size of the lamination used for the design and construction of the transformer
4.2 Graph of (Max) against VCB
4.3 The comparator circuit diagram
CHAPTER FIVE
5.0 Short circuit test
5.1 Open circuit test
5.2 Casing diagram
This Project is for You If:
- You are writing your final year project for the first time and don't want to make costly mistakes
- This is your exact topic, or very close to what your supervisor gave you
- Your supervisor has rejected one or more chapters and you don't know what to fix
- You are stuck on Chapter 3 or data analysis and nothing is making sense
- Your deadline is close and you are still far behind
- You can't find enough materials anywhere for your topic
- My project supervisor is very strict and I don't want to have any problem with my project work — I need a well structured and referenced project
- I saw my school project requirement and I am confused on where or what to do
- Everyone in my class has submitted their project and I haven't even started yet
- My supervisor rejected my research methodology and I don't know what to do
- I thought my topic was simple and easy but on Chapter 2 I cannot find any material and my work is due for submission
- I have the content somehow but my references and bibliography are all over the place and I don't know how to arrange them properly
- I am combining school with work and I genuinely do not have the time to write everything from scratch — I just need something to work with
- My supervisor changed the topic I wanted and approved another one — I am confused on where to start from
- I am scared of submitting something that will be flagged for plagiarism — I need something original that I can use as a proper guide
- I have been browsing the internet for days looking for materials on this topic and I cannot find anything useful anywhere
- This is not my first time doing this project — I have carried it over before and I cannot afford to do it again
- I have written some chapters already but I am stuck midway and need to see how others handled the same topic
Here's everything you get with the complete project package:
✔Chapters 1–5 (Word & PDF)
✔Abstract & Table of Contents
✔References, Citation & Bibliography
✔Fully Editable Microsoft Word Format
✔Original, Plagiarism-Free Content
✔Delivery Within 24 Hours
Complete package —₦10,000₦5,000
Price may return to ₦10,000 at any time.
See Our Conversations With Students on WhatsApp
Students sharing their experience after using our service
Urgent delivery confirmed
Screenshot unavailable
Payment received and project delivered
Screenshot unavailable
Quality work and a repeat order
Screenshot unavailable
Returning customer appreciation
Screenshot unavailable
Customer appreciation
Screenshot unavailable
What Other Students Are Saying
↩ View More ReviewsCan't find what you're looking for?
Search thousands of project topics across every department.
Frequently Asked Questions
Yes. All project materials on iProject are original, well-researched, and crafted to be plagiarism-free. They are intended as academic guides and reference materials.
You will receive the complete project in both Microsoft Word (.docx) and PDF formats, making it easy to edit and submit.
Once payment is confirmed, the material is delivered within 24 hours to the email address supplied at checkout.
Absolutely. The Word format is fully editable, allowing you to modify the content, swap out case studies, and adapt the material to your specific research context.