This research is centered on the design and fabrication of copula furnace and atomizer for the production aluminium powder metal with the available material.0.4kg of refined coke was chosen as the basis for material and energy balance calculations and the design calculations performed from whose values are used to produce the design drawings. Mild steel was used for the internal linings of the furnace casing while other material were selected based on functionality, durability ,cost and local availability. The furnace and atomizer were assembled and the furnace inner wall of the casing was lined with refractory bricks made from heated mixture of kaolin, clay, sawdust and water after which the cylindrical shell was positioned. Testing was subsequently performed to evaluate the performance of the furnace and the atomizer by first gathering of the aluminum cans. The furnace was heated to 8700c and it was observe that the furnace has 36.9% efficiency which is within the acceptable value for furnace efficiencies. Atomizer produced various sizes of powder metal depending on the type of mesh used and the shape obtained was irregular in shape.
DESIGN AND FABRICATION OF MINI COPULA FURNACE AND AN ATOMIZER FOR THE PRODUCTION OF POWDERED METAL FROM WASTE ALUMINIUM CANS
DESIGN AND FABRICATION OF MINI COPULA FURNACE AND AN ATOMIZER FOR THE PRODUCTION OF POWDERED METAL FROM WASTE ALUMINIUM CANS
Chapters 1–5 | ₦5,000
Get Complete Project Material NowABSTRACT
CHAPTER ONE
INTRODUCTION
1.1 Background of Study
Powder metallurgy is a technique concerned with the production of metal powders and converting them into useful shapes. It is a material processing technique in which particulate materials are consolidated to semi-finished and finished products. Metal powder production techniques are used to manufacture a wide spectrum of Metal powders designed to meet the requirements of a large variety of applications. Various powder production processes allow precise control of the chemical and physical characteristics of powders and permit the development of specific attributes for the desired applications. Powder production processes are constantly being improved to meet the quality, cost and performance requirements of all types of applications. Metal powders are produced by mechanical or chemical methods.
The most commonly used methods include water and gas atomization, milling, mechanical alloying, electrolysis, and chemical reduction of oxides.
This Project is for You If:
- You are writing your final year project for the first time and don't want to make costly mistakes
- This is your exact topic, or very close to what your supervisor gave you
- Your supervisor has rejected one or more chapters and you don't know what to fix
- You are stuck on Chapter 3 or data analysis and nothing is making sense
- Your deadline is close and you are still far behind
- You can't find enough materials anywhere for your topic
- My project supervisor is very strict and I don't want to have any problem with my project work — I need a well structured and referenced project
- I saw my school project requirement and I am confused on where or what to do
- Everyone in my class has submitted their project and I haven't even started yet
- My supervisor rejected my research methodology and I don't know what to do
- I thought my topic was simple and easy but on Chapter 2 I cannot find any material and my work is due for submission
- I have the content somehow but my references and bibliography are all over the place and I don't know how to arrange them properly
- I am combining school with work and I genuinely do not have the time to write everything from scratch — I just need something to work with
- My supervisor changed the topic I wanted and approved another one — I am confused on where to start from
- I am scared of submitting something that will be flagged for plagiarism — I need something original that I can use as a proper guide
- I have been browsing the internet for days looking for materials on this topic and I cannot find anything useful anywhere
- This is not my first time doing this project — I have carried it over before and I cannot afford to do it again
- I have written some chapters already but I am stuck midway and need to see how others handled the same topic
Here's everything you get with the complete project package:
✔Chapters 1–5 (Word & PDF)
✔Abstract & Table of Contents
✔References, Citation & Bibliography
✔Fully Editable Microsoft Word Format
✔Original, Plagiarism-Free Content
✔Delivery Within 24 Hours
Complete package —₦10,000₦5,000
Price may return to ₦10,000 at any time.
See Our Conversations With Students on WhatsApp
Students sharing their experience after using our service
Urgent delivery confirmed
Screenshot unavailable
Payment received and project delivered
Screenshot unavailable
Quality work and a repeat order
Screenshot unavailable
Returning customer appreciation
Screenshot unavailable
Customer appreciation
Screenshot unavailable
What Other Students Are Saying
↩ View More ReviewsCan't find what you're looking for?
Search thousands of project topics across every department.
Frequently Asked Questions
Yes. All project materials on iProject are original, well-researched, and crafted to be plagiarism-free. They are intended as academic guides and reference materials.
You will receive the complete project in both Microsoft Word (.docx) and PDF formats, making it easy to edit and submit.
Once payment is confirmed, the material is delivered within 24 hours to the email address supplied at checkout.
Absolutely. The Word format is fully editable, allowing you to modify the content, swap out case studies, and adapt the material to your specific research context.