Home » Electrical Engineering » DESIGN AND DEVELOPMENT OF POWER OPERATED BANANA SLICER FOR SMALL SCALE FOOD PROC...
DESIGN AND DEVELOPMENT OF POWER OPERATED BANANA SLICER FOR SMALL SCALE FOOD PROCESSING INDUSTRIES
Sold By: Joe Project Store | Item Type: Project Material | Report this? | Attributes: 44 pages | 1-5 chapters | Amount: ₦5,000 | 1 order. | Marked useful: 5,047 times
INSTANT PROJECT MATERIAL DOWNLOADABSTRACT
A power rotary banana slicer suitable for small scale processing was designed and developed based on engineering properties of banana varieties, namely Nendran and Dwarf Cavendish. This banana slicer mainly consists of feeders for round slicing, cutter, power transmission mechanism, base support and frame. 111e power operated rotary slicer with three blade cutter that was operating at 36CJ rpm speed was developed to overcome drawbacks of existing hand or power operated rotary slicers and to meet the demand of small scale processing industries. This slicer has slicing efficiency of about a 93-94·% with effective capacity of about 100 kg/h for both varieties. The mean thickness of cut for both varieties was about 2.00 ± 0.194 mm, whereas mean roundness was of 0.84 and 0.70 for Nendran and Dwarf Cavendish varieties respectively.
TABLE OF CONTENTS
Title page
Certification - - - - - - - - ii
Dedication - - - - - - - - iii
Acknowledge - - - - - - - - iv
Abstract - - - - - - - - - v
Table of content - - - - - - - vi
CHAPTER ONE
- Introduction (Historical Background of the Project - - 1
- Statement of the problem - - - - 2
- Aim and Objective of the work - - - 2
- Purpose of the work - - - - - 3
- Definition of term - - - - - 3
- Limitation of work - - - - - 4
- Delimitation of work - - - - - 4
CHAPTER TWO
2.1 Review of the problem - - - - - 5
2.2 Work-shop Tool Equipment - - - - 16
2.3 Material Involve and Method of production - 19
2.4 Performance Evaluation - - - - 26
2.5 Result and discussion - - - - 30
CHAPTER THREE
3.1 Qualitative Function of the Project/use of
project work - - - - - - - 31
3.2 Demand of the work - - - - - 31
CHAPTER FOUR
4.1 Analysis of data result - - - - - 33
4.2 Funding - - - - - - - - 35
CHAPTER FIVE
5.1 Summary - - - - - - - 36
5.2 Conclusion - - - - - - - 37
5.3 Recommendation - - - - - - 38
CHAPTER ONE
1.2 STATEMENT OF THE PROBLEM
This project seek to identify the easier way that could be use in slicing banana seen banana is one of the most important fruit use in many fruit juice with high nutrient, the project work is to seek on how to keep man in area of its production using banana slicer.
1.3 AIM AND OBJECTIVE OF THE PROBLEM
The project aim at examining the best technological way of slice banana.
- To examine the benefit and temotions of banana slicer
- To add benefit to the oldest way of slicing banana using manual method.
1.4 PURPOSE OF THE WORK
This project was undertaken with the view to examine the function of function in banana production to man.
This material content is developed to serve as a GUIDE for students to conduct academic research
DOWNLOAD THIS PROJECT MATERIAL NOW!
Advertise Here
Not what you were looking for? Perform a search
What's your project topic?
Comment on Facebook:
Related Project Materials
- 1.
IMPACT OF FORMAL EDUCATION ON COMMUNITY DEVELOPMENT IN OREDO LOCAL GOVERNMENT, EDO STATE
ABSTRACT The broad objective of this study is to examine the impact of formal education on community development in Oredo Local Government, Edo State....More »
Item Type: Project Material | 54 pages | 4,906 engagements |
- 2.
CONSTRUCTION OF CRITICAL TEMPERATURE ALARM SYSTEM
ABSTRACT The term “critical point” is sometimes used to denote specifically the vapour liquid critical point of a material. The vapour liquid ...More »
Item Type: Project Material | 46 pages | 11,443 engagements |
- 3.
THE CONSTRUCTION OF LABORATORY EQUIPMENT FOR THE DETERMINATION / INVESTIGATION OF ELECTRICAL INSULAT...
ABSTRACT Insulation deterioration occurs on power system when insulators are subjected to abnormal stresses. Since insulators cannot resist indefinite...More »
Item Type: Project Material | 31 pages | 7,639 engagements |
- 4.
CONSTRUCTION OF 2000W AUTOMATIC VOLTAGE REGULATOR
ABSTRACT This project is all about Automatic Voltage Regulator (AVR), and is a circuit that monitors the input voltage at any point and display the re...More »
Item Type: Project Material | 50 pages | 11,115 engagements |
- 5.
DESIGN AND CONSTRUCTION OF AN ELECTRICAL ROBOTIC TRAIN;THE CONTROL SYSTEM DRIVE(COMPATIBILITY MODE)
1.0 Introduction A robot is a computer controlled machine that can be programmed to move, manipulate objects and accomplish work w...More »
Item Type: Project Material | 34 pages | 8,194 engagements |
- 6.
THE ELECTRICAL DESIGN AND INSTALLATION REQUIREMENT FOR A MEGA FILLING STATION
ABSTRACT A mega filling station can be described from its name –MEGA; which means larger in size. This implies that mega filling station is a lar...More »
Item Type: Project Material | 55 pages | 12,946 engagements |