DESIGN AND CONSTRUCTION OF DIGITAL INCUBATOR
Sold By: Joe Project Store | Item Type: Project Material | Report this? | Attributes: 65 pages | 1-5 chapters | Amount: ₦3,000 | 20 orders. | Marked useful: 7,708 times
INSTANT PROJECT MATERIAL DOWNLOADPREFACE
The purpose of this text is to present at a primary and intermediate level a comprehensive over view of the construction principle and indeed the operation of a Digital Incubator. We want to present a situation where by as the temperature in going up let the resistance be decreasing and as the temperature decreases let the resistance be going up.
The history and importance of Electronics as a unique branch of science cannot be over emphasized Electronic as its history might have it, is divided into two periods. The first began with the invention of the vacuum tube, the second, occupying the later half of the twentieth century in based on the invention of the transistor.
Since Electronic is the branch of science and Technology relating to the conduction and control of electricity flowing through semi-conductor materials through vacuum are based. Its application to industry will be concerned with the design, manufacture and application of transistors, dides, integrated circuits and other semi-conductor devices and to a much lesser extent vacuum tubes.
Therefore, it is a fact crystal clear, that it is from the above breed and follow up from the electronic industry that such devices like Digital incubator was able to be made, Digital incubator is therefore device designed to keep chicken and babies at a required temperature when they are delivered prematurely especially as it applies to babies. It is used to keep them worm.
It is commendable to note here that with the help of this digital work on construction and operation of digital incubator, students of electronic engineering now have a text to lay hands on.
TABLE OF CONTENTS
Title page
Approval page
Dedication
Acknowledgement
Table of contents
Preface
CHAPTER ONE
INTRODUCTION
CHAPTER TWO
PROJECT REVIEW
CHAPTER THREE
COMPONENT DESCRIPTION
3.0 INTRODUCTION
3.1 TRANSFORMER
3.1.1 STEP- DOWN TRANSFORMER
3.1.2 Step-up transformer
3.1.3 Transformer Ratings
3.2 RESISTOR
3.3 CAPACITOR
3.4 DIODE
3.5 RECTIFIER
3.6 TRANSISTOR
3.7 RELAY
3.9 LIGHT EMITTING DIODE (LED)
CHAPTER FOUR
THE PRINCIPLE OF OPERATION OF A DIGITAL INCUBATOR.
4.1 VERO BOARD:
4.2 HEATING ELEMENT (BULB)
4.3 FAN
4.4 CABLES
CHAPTER FIVE
PACKAGING AND DESIGN
4.6 MOUNTING PROCEDURE
CHAPTER SIX
CONSTRUCTION AND TESTING
6.1 TESTING THE CIRCUIT
CHAPTER SEVEN
CONCLUSION
PROJECT COST
BIBLIOGRAPHY
This material content is developed to serve as a GUIDE for students to conduct academic research
Find What You Want By Category:
DOWNLOAD THIS PROJECT MATERIAL NOW!
Advertise Here
For advertisement, call 08168958821
Not what you were looking for? Perform a search
What's your project topic?
Comment on Facebook:
Related Project Materials
- 1.
IMPACT OF FORMAL EDUCATION ON COMMUNITY DEVELOPMENT IN OREDO LOCAL GOVERNMENT, EDO STATE
ABSTRACT The broad objective of this study is to examine the impact of formal education on community development in Oredo Local Government, Edo State....More »
Item Type: Project Material | 54 pages | 2,820 engagements |
- 2.
CONSTRUCTION OF CRITICAL TEMPERATURE ALARM SYSTEM
ABSTRACT The term “critical point” is sometimes used to denote specifically the vapour liquid critical point of a material. The vapour liquid ...More »
Item Type: Project Material | 46 pages | 9,637 engagements |
- 3.
THE CONSTRUCTION OF LABORATORY EQUIPMENT FOR THE DETERMINATION / INVESTIGATION OF ELECTRICAL INSULAT...
ABSTRACT Insulation deterioration occurs on power system when insulators are subjected to abnormal stresses. Since insulators cannot resist indefinite...More »
Item Type: Project Material | 31 pages | 6,183 engagements |
- 4.
CONSTRUCTION OF 2000W AUTOMATIC VOLTAGE REGULATOR
ABSTRACT This project is all about Automatic Voltage Regulator (AVR), and is a circuit that monitors the input voltage at any point and display the re...More »
Item Type: Project Material | 50 pages | 9,257 engagements |
- 5.
DESIGN AND CONSTRUCTION OF AN ELECTRICAL ROBOTIC TRAIN;THE CONTROL SYSTEM DRIVE(COMPATIBILITY MODE)
1.0 Introduction A robot is a computer controlled machine that can be programmed to move, manipulate objects and accomplish work w...More »
Item Type: Project Material | 34 pages | 6,671 engagements |
- 6.
THE ELECTRICAL DESIGN AND INSTALLATION REQUIREMENT FOR A MEGA FILLING STATION
ABSTRACT A mega filling station can be described from its name –MEGA; which means larger in size. This implies that mega filling station is a lar...More »
Item Type: Project Material | 55 pages | 10,762 engagements |