iProject

DESIGN AND IMPLEMENTATION OF WIRELESS BATCH COUNTING DEVICE FOR BREWERY

📄 Project Material📋 56 pages📚 Chapters 1–5💾 MS-Word & PDF

Chapters 1–5  |  ₦5,000

Download Complete Project Now

DESIGN AND IMPLEMENTATION OF WIRELESS BATCH COUNTING DEVICE FOR BREWERY

 

ABSTRACT

This project deals on the design and implementation of Radio frequency RF based wireless batch counting device for brewery capable of counting the bottled drinks /product in a conveyor and displays the value numerically and wireless to it receiver installed about 100meters away. It is realized in top-down methodology using passive and active components available in the local market. This electronic system is designed in two functional units, the transmitter and the receiver and they communicate by the principle of electrical resonance using Rf transmission wave band. The bottles are sensed using an opto-couple, transmitted to the receiver using Rf module and displayed using a 2-digit seven segment display. The system is packaged in a portable plastics casing, the result being a Rf based wireless batch counting device for brewery. It is not micro program control and displays from 00-99 (one hundred counts).

TABLE OF CONTENT

Title page       -           -           -           -           -           -           -           -          -           i

Certification page    -           -           -           -           -           -           -           -          ii

Approval page          -           -           -           -           -           -           -          -           iii

Dedication     -           -           -           -           -           -           -           -          -           iv

Acknowledgement               -           -           -           -           -           -           -          v

Abstract         -           -           -           -           -           -           -           -          -           vi

Table of content       -           -           -           -           -           -           -           -          vii

List of tables             -           -           -           -           -           -           -          -           -           ix

List of figures           -           -           -           -           -           -           -          -           x

 

 

Chapter One

1.1.           Background of the study     -           -           -           -           -           -           1

1.2.           Problem statement   -           -           -           -           -           -           -           1

1.3.           Aim and objectives              -           -           -           -           -           -           2

1.4.           Significant of the project    -           -           -           -           -           -           2

1.5.           Scope of the project             -           -           -           -           -           -           3

1.6.           Project report organization-           -           -           -           -           -           3

1.7.           Definition of terms -           -           -           -           -           -           -           4

 

 

Chapter Two           

2.1.           Analysis of the exiting system       -           -          -           -           -           5

2.2.           Historical development of the project      -           -           -           -           5

2.3.           Analysis of the proposed system   -           -           -           -           -           6

2.4.           Application of the project              -           -           -           -           -           -          7

2.5.           Electromagnetic spectrum -           -           -           -           -           -           7

2.6.2.     Transistor static switch and electromagnetic      -           -           -           12       

2.7.           Other system components  -           -           -           -           -           -           15

 

Chapter Three

3.1.           Description of the system building blocks          -           -           -           23

3.2.           Block diagram Development into working circuit          -           -           23

3.3.           System design specification           -           -           -           -           -           24

3.4.           Power supply unit    -           -           -           -           -           -           -           25

3.5.           Principle of operation of the system         -           -           -           -           26

3.6.           System design calculation  -           -           -           -           -           -           27

3.6.1.     Choice of filter capacitor    -           -           -           -           -           -           27

3.6.2.     Choice of laser diode          -           -           -           -           -           -           28

3.6.3.     Design of transistor circuit diagram          -           -           -           -           31

3.7.           Explanation of the circuit diagram            -           -           -           -           32

 

Chapter Four

4.1.           Implementation        -           -           -           -           -           -           -           33

4.2.           Testing           -           -           -           -           -           -           -           -          33       

4.3.           Result             -           -           -           -           -           -           -           -           33

4.4.           Project packaging     -           -           -           -           -           -           -           34

 

Chapter Five

5.1.           Conclusion    -           -           -           -           -           -           -           -           36

5.2.           Recommendation     -           -           -           -           -           -           -           36

References                -           -           -           -           -           -           -           37

Components list       -           -           -           -           -           -           -           38

 

 

CHAPTER ONE

RADIO FREQUENCY BASED WIRELESS BATCH COUNTING DEVICE FOR BREWERY

1.1.           Background of the Study

Owing to the high rate of industrial espionage and theft, industrial security techniques need to be improved to arrest/combat pilfering in industries.  This project work tries to bring in an improved security measure which can be used to check pilfering in Brewery industries.  Pilfering of bottled drinks is a common theft in Breweries.  And this act is perpetrated in the conveyor before a standalone counting device takes account of it.  This has a tremendous effect on the stature of the fire – if it is not properly checked, could lead to liquidation and bankrupts of the firm.

Conventionally, there is a batch counting device that counts the bottled drinks and displays the values numerically at same spot carrier criminals who pilfer the products divert it before the counter.  This chronology in social vices in the brewery industry has motivated me to embark on a project that is capable of counting/the bottled drinks in the capable of counting/the bottled drinks in the conveyor and display the value numerical and wirelessly (using Rf transmission waveband) to its receiver installed about 100m away.  This device will count the product before it gets to the standalone version.  This technique will help to check pilfering and bring industrial espionage to halt.

 

1.2.           Problem Statement

Brewery industries all over world face the problem of pilfering of the products by the workers most frequently in the conveyer. This menace gave way to the development of a stand alone batch counting device which is usually installed in the conveyors to record the total number of bottled products. This techniques is facing serious threat since the bad-eggs pilfer/divert the products before it gets to the counter.

Owing to the challenges mentioned above, there is need to develop a system which will be installed at the entry point of the conveyors to count the products without the consent of the workers and display the value to a receivers unit  installed in the manager office using Radio-frequency technology.

 

1.3.           Aims and Objectives

The aim of this project is to design and implement a Radio frequency based wireless batch counter capable of counting bottled drinks/products and display it at a remote location.

1.      To develop system which can communicate using Radio frequency technology.

2.      To develop an opto coupler module which can detect opaque objects like bottle using laser diode and visible light

3.      To develop a 2-digit decimal counting unit which can count from 00-99.

4.       To develop a system

This Project is for You If:

Yes, This Is My Situation — Send Me the Complete Material

Here's everything you get with the complete project package:

✔Chapters 1–5 (Word & PDF)
✔Abstract & Table of Contents
✔References, Citation & Bibliography
✔Fully Editable Microsoft Word Format
✔Original, Plagiarism-Free Content
✔Instant Email Delivery
Complete package —₦10,000₦5,000
Price may return to ₦10,000 at any time.

See Our Conversations With Students on WhatsApp

Students sharing their experience after using our service

Urgent delivery confirmed
Urgent delivery confirmed
Payment received and project delivered
Payment received and project delivered
Quality work and a repeat order
Quality work and a repeat order
Returning customer appreciation
Returning customer appreciation
Customer appreciation
Customer appreciation
I’ve Seen Enough — Get Me This Project Material

What Other Students Are Saying

“The process was actually fine and I got my project quickly. The only thing I didn't really like was that I would have preferred they sent it via WhatsApp instead of email, because email took a bit of checking on my side. But once I got it, everything was already complete and I just edited small parts before submitting.”
Zina
Kenpoly
“My supervisor rejected my Chapter 1 and 2 and I was honestly lost. I got a material here and it already had everything arranged properly. I just adjusted it to my topic and resubmitted. The difference was clear immediately.”
Favour
Nekede
“My supervisor almost finished me 😭 He rejected everything and said I didn't understand basics. I downloaded something here, used it to restructure my work, and resubmitted. That was how I escaped serious stress.”
Nnamdi
Absu

Can't find what you're looking for?

Search thousands of project topics across every department.

Related Project Materials

See More Computer Science Final Year Research Project Topics & Materials »

Frequently Asked Questions

Is this project original and plagiarism-free?
Yes. All project materials on iProject are original, well-researched, and crafted to be plagiarism-free. They are intended as academic guides and reference materials.
What format will I receive the material in?
You will receive the complete project in both Microsoft Word (.docx) and PDF formats, making it easy to edit and submit.
How soon will I get it after payment?
Delivery is instant. Once payment is confirmed, the material is sent directly to your email address. You can also download it immediately from the checkout page.
Can I edit the content to fit my own case study?
Absolutely. The Word format is fully editable, allowing you to modify the content, swap out case studies, and adapt the material to your specific research context.
All My Questions Are Answered — Download the Complete Project
Message us