Quick Project Search


| Back |

Department of Chemical Engineering | Final Year Research Project Topics | Download Free Projects

  • 81. CONSTRUCTION OF AIR CONDITIONING UNIT

    »   ABSTRACT The project of construction is one (1) horse power Air conditioning unit which was executed successfully.  With up to seventy five percent (75%) efficient performance.   The project started with the construction of the size of the air conditioning unit.  The air conditioning unit is 60x40x 45cm in dimension.  Air conditioners employ the same operating principle and basic components...Continue Reading »

    65 pages |  193 engagements | 

  • 82. CONSTRUCTION OF ALUMINIUM WALL RACK

    »   ABSTRACT             This project was constructed with the desired materials of construction. The materials include aluminum, glass and wood.  Aluminum was used in forming the skeleton of the structure, glass was used for the doors while wood was used in the sides, top, base and partitions.             After building the skeleton of the structure with aluminum, other mate...Continue Reading »

    65 pages |  176 engagements | 

  • 83. CONSTRUCTION OF OFFICE TABLE AND CHAIRS

    »    ABSTRACT Office table and chairs usually come in set of three, and are designed to fit one into another for convenient storage. Furniture of this soot should be of the highest quality, attractive in design and capable of standing up to many years in use.             The cost of the wood and the amount of time spent on this project may restrict you to making one table only and the c...Continue Reading »

    65 pages |  266 engagements | 

  • 84. THE CONSTRUCTION OF SAND FILTER FOR PORTABLE WATER FILTRATION WITH STAINLESS STE...

    »   ABSTRACT The project constructed was sand filter; equipment for portable water filtration.  This was constructed using a mild steel material.  This was because of the excellent high qualities of mild steel such as; durability tensile strength, high corrosion resistance and also relative in cost compare to other special alloyed materials, like stainless steel. The send filter was chosen to be ...Continue Reading »

    65 pages |  177 engagements | 

  • 85. CONSTRUCTION OF MOTORIZED MIXER

    »   ABSTRACT The fabrication of the pilot motorized mixer in volved a preliminary computation of the durunsions of the galvanized steel used, marketing out cutting out to sizes folding, welding, assembling and painting. The dimensions of the motorized mixer are as follows: The vessel is of 300min in diameter and 450mm in height, the conical edge of the cover is of 300mm in diameter which is formed ...Continue Reading »

    65 pages |  165 engagements | 

  • 86. CONSTRUCTION OF SIMPLE METALLIC MOULD

    »   CHAPTER ONE 1.0         INTRODUCTION The equipment mostly used in the industries and manufacturing establishments requires the production of definite shape, pattern, different design, embossments and others, are usually moulds.  The ability of moulds to withstand pressure, distortion and corrosion determines the application. A mould has been defined as a pattern constructed for the pr...Continue Reading »

    65 pages |  183 engagements | 

  • 87. CONSTRUCTION OF PROPELLER AGITATOR

    »   ABSTRACT The construction of propeller agitator used for agitating and mixing of low viscous fluid was fabricated in the mechanical workshop of the institute of management and technology Enugu. In the construction, galvanized mild steel was chosen due to its inherent properties.  After procurement, the following constructional operations were carried out; working drawing, marking, center punch...Continue Reading »

    65 pages |  160 engagements | 

  • 88. CONSTRUCTION OF METAL SHELF

    »   ABSTRACT In this construction of metal shelf, mild steel was chosen due to its inherit duties. The undismountable metal shelf, which has four compartments and four partition was constructed under the following processes. This  includes drawing and dimensioning of the proposal metal. Metal shelf, market surveying and procurement of the needed materials, marketing out and cutting of the material...Continue Reading »

    65 pages |  176 engagements | 

  • 89. CONSTRUCTION OF SIMPLE DISTILLATION UNIT

    »   ABSTRACT Distillation unit is the judgment used for the separation of liquid mixture depending on the volatility of the component. It has the top section and bottom section. In the top section this is where more volatile component goes and the bottom section is where the divider or less volatile component are continued therefore when feed are introduced into the column the vapour flows up the c...Continue Reading »

    65 pages |  187 engagements | 

  • 90. CONSTRUCTION OF SOAP CUTTING DEVICE

    »   ABSTRACT The aim of the project is to construct a soap cutting device capable of size remaining the soap produced into regular bars and tablets without error in shapes and sizes.         Soap cutting devices are used to size reduce or cut the bulk of soap produced into bars and tablets.  Soap cutting devices facilitate the process of cutting the produced soap to a required size that can...Continue Reading »

    65 pages |  164 engagements | 

  • 91. CONSTRUCTION OF STEEL SHELF

    »   ABSTRACT The steel shelf was constructed at the mechanical engineering workshop of the institute. It was done by first of all making out the dimension with the scribers, cutting, wielding, dittoing, assembling and painting. The method ology involved the preliminary calculation of the total surface area of the two mili meters thickness of the sheet measured 4ft with by 6ft height. Moreover, the ...Continue Reading »

    65 pages |  -1 engagements | 

  • 92. WATER POLLUTION

    »   ABSTRACT This seminar studied and analyzed Water Pollution, the causes, the effects, the sources, types and control of Water Pollution in the societies water pollution occurred when pollutants were discharged directly or indirectly into water bodies without adequate treatment to remove harmful compounds, Water Pollution affected plant, and organisms living in this bodies of water.       ...Continue Reading »

    65 pages |  195 engagements | 

  • 93. CONSTRUCTION OF TURBINE MIXER

    »   ABSTRACT The Turbine Mixer was Fabricated at the Mechanical Engineering Workshop of Institute of Management and Technology, Enugu. The method of the fabrication of the turbine mixer involved a preliminary computation of the dimensions of the standard turbine in relation to the dimension of the reacting vessel in which they will be used in, making out, cutting out to sizes, rolling folding, weld...Continue Reading »

    65 pages |  182 engagements | 

  • 94. CONSTRUCTION OF INDUSTRIAL MIXER

    »   ABSTRACT Industrial mixer is equipment designed to carryout operation involved the combination of two or more substance to achieve a uniform product.        The method of fabrication of this mixer involves a preliminary computation of the dimensions of the standard which they will be used in marketing out cutting, out to sizes rolling or folding, welding, body filling and painting to pre...Continue Reading »

    65 pages |  163 engagements | 

  • 95. CONSTRUCTION OF KEROSINE COOKING STOVE

    »   Abstract The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties passed by the chosen mild steel are; machinability ,weldability,durability,andformability.me...Continue Reading »

    65 pages |  178 engagements | 

  • 96. EXTRACTION OF WAX FROM COCOA POD

    »   CHAPTER ONE INTRODUCTION The word wax describes a large variety of substances of plant and animal origin, as well as man made products which are mostly petroleum derivatives. However, natural waxes are not single substances, but a mixture of various of long chain fatty acids and a variety of other constituents, depending on their origin. Each wax therefore has unique physical and chemical chara...Continue Reading »

    65 pages |  182 engagements | 

  • 97. REPORT ON FABRICATION OF FLOW NOZZLE

    »   ABSTRACT The flow nozzle was constructed based on the dimensions and specifications of the international standard organization (I.S.O) recommendation. Throat diameter 42.5mm Length converging nozzle 68mm Thickness of nozzle 2mm Diameter of major axis of ellipse 85mm Diameter of minor axis of ellipse 56.6mm Diameter of duct pipe 85mm             The absence of this device (Nozzle) has...Continue Reading »

    65 pages |  165 engagements | 

  • 98. REPORT O FABRICATION OF FLOW NOZZLE

    »   ABSTRACT The flow nozzle was constructed based on the dimensions and specifications of the international standard organization (I.S.O) recommendation. Throat diameter 42.5mm Length converging nozzle 68mm Thickness of nozzle 2mm Diameter of major axis of ellipse 85mm Diameter of minor axis of ellipse 56.6mm Diameter of duct pipe 85mm             The absence of this device (Nozzle) has...Continue Reading »

    65 pages |  159 engagements | 

  • 99. REPORT ON THE FABRICATION OF SIEVE SYSTEM

    »   ABSTRACT The construction of sieves system was carried out in the Engineering workshop, Institute of management and technology, Enugu. The aim of this project is to fabricate a sieve system, which is capable of separating solid particles of various sizes. The construction was carried out in order to analyze the sizes of particles. The component parts of the sets of sieve and their dimension are...Continue Reading »

    65 pages |  154 engagements | 

  • 100. PROCESS AND QUALITY FACTORS IN LAUNDARY AND TOILET SOAP PRODUCTION

    »   ABSTRACT This projects is aimed at knowing the process and quality factor in Laundary and Toilet Soap Projection.  Various factors affected the quality of the soap produced.  These include the method used in production, types and nature of oils used, the percentage of the additives in the soap and the ratio at which oils are mixed to react with alkali. The work was carried out using one type ...Continue Reading »

    65 pages |  196 engagements | 


Searching makes things a lot easier.. Search for what you are looking for

Quick Project Search